1700C Bench-Top High Temperature Muffle Furnace KSL-1700X-A2-UL

Home

Products

Laboratory Equipment

Muffle Furnaces

1600-1700℃ Muffle Furnaces Heated by MoSiO2

IF5254 (Discontinued) 1700C Bench-Top High Temperature Muffle Furnace KSL-1700X-A2-UL

Catalog No.	IF5254
Item Number	KSL-1700X-A2-UL
Working Temperature	1600℃ continuously
Max Working Temp. (℃)	1700℃, ≤30mins
Chamber Size	200200200mm (8L)

Discontinued

1700C Bench-Top High-Temperature Muffle Furnace KSL-1700X-A2-UL is a bench-top high-temperature muffle furnace that consists of high-quality alumina fiber bricks and MoSi2 heating elements with a chamber size of 8" x 8" x 8". Stanford Advanced Materials (SAM) has rich experience in manufacturing and supplying high-quality Muffle Furnaces.

INQUIRY

Add to Inquiry List

sc/1701056865-normal-1700c-bench-top-high-temperature-muffle-furnace-ksl-1700x-a2-ul.png

Description

Specification

1700C Bench-Top High-Temperature Muffle Furnace KSL-1700X-A2-UL Description

1700C Bench-Top High-Temperature Muffle Furnace KSL-1700X-A2-UL is a high-temperature box furnace equipped with silicon molybdenum rods as heating elements. It features a dual-layer shell structure and PID program temperature control, utilizing a B-type thermocouple. The furnace chamber is constructed with high-purity alumina fiber material, allowing it to achieve a maximum temperature of 1700 degrees. It can operate continuously at a temperature of 1600 degrees, with a temperature control accuracy of ±1 degree.

1700C Bench-Top High-Temperature Muffle Furnace KSL-1700X-A2-UL Specifications

Furnace Structure	1800-grade fiber alumina with reflective coating - max energy-saving design Overheating and burnout protection, power-off when opening the door Double-layer steel structure with air cooling fan to keep case temperature below 60℃
Dimensions	Chamber: 200mm L x 200mm W x 200mm D (8 x 8 x 8 inch), 8.4 Liter Overall: 550mm L x 540mm W x 620mm H
Power	5.2 KW
Voltage	AC 208V-240V single phase, 50/60 Hz (32A air breaker required) Note: Plug is not included, and it is suggested you use NEMA L5-30 / NEMA 10-30P plug for AC 110V and NEMA 6-20P plug for AC 208~240V)
Standard Working Temperature	1600℃ or 2912℉ (continuous)
Maximum Working Temperature	1700℃ or 3092℉ (< 3 hours)
Heating Rate	0~20℃ / min (suggestion ≤10℃)
Temperature Accuracy	+/- 1° C
Temperature Uniformity	+/- 5℃ over 120 mm (5") @ 1700℃ +/- 2℃ over 80 mm (3") @ 1700℃
Thermocouple	B Type (Pt-Rh to Pt-Rh) with Alumina tube
Heating Elements	Super 1800 grade MoSi2 Heating Elements (30 x 360mm)
Temperature Controller	Proportional–integral–derivative control (PID control) and auto-tune function 30 segments programmed with ramping, cooling, and dwelling steps Built-in over-temperature alarm and thermocouple failure alarm +/- 1℃ temperature control accuracy Default DB9 PC communication port
Net Weight	135 kg (286 lbs.)
Warranty	One-year limited warranty with lifetime support. ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of SAM One Year Limited Warranty.
Compliance	CE Certified NRTL or CSA certification is available upon request at an extra cost
Shipping Dimensions	48" x 40" x 49"
Shipping Weight	450 lbs.
Application Notes	For longer furnace service life, we recommend the heating rate not to exceed 10℃ /min. The cooling rate shall also not exceed 10℃ /min. This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating The refractory block must be inserted before closing the door

1700C Bench-Top High Temperature Muffle Furnace KSL-1700X-A2-UL Applications

1700C Bench-Top High Temperature Muffle Furnace KSL-1700X-A2-UL is an ideal tool for annealing and sintering materials in research or dental labs.

1700C Bench-Top High Temperature Muffle Furnace KSL-1700X-A2-UL Packaging

Our 1700C Bench-Top High Temperature Muffle Furnace KSL-1700X-A2-UL is carefully handled during storage and transportation to preserve the quality of our product in its original condition.

Specification

Furnace Structure	1800-grade fiber alumina with reflective coating - max energy-saving design Overheating and burnout protection, power-off when opening the door Double-layer steel structure with air cooling fan to keep case temperature below 60℃
Dimensions	Chamber: 200mm L x 200mm W x 200mm D (8 x 8 x 8 inch), 8.4 Liter Overall: 550mm L x 540mm W x 620mm H
Power	5.2 KW
Voltage	AC 208V-240V single phase, 50/60 Hz (32A air breaker required) Note: Plug is not included, and it is suggested you use NEMA L5-30 / NEMA 10-30P plug for AC 110V and NEMA 6-20P plug for AC 208~240V)
Standard Working Temperature	1600℃ or 2912℉ (continuous)
Maximum Working Temperature	1700℃ or 3092℉ (< 3 hours)
Heating Rate	0~20℃ / min (suggestion ≤10℃)
Temperature Accuracy	+/- 1° C
Temperature Uniformity	+/- 5℃ over 120 mm (5") @ 1700℃ +/- 2℃ over 80 mm (3") @ 1700℃
Thermocouple	B Type (Pt-Rh to Pt-Rh) with Alumina tube
Heating Elements	Super 1800 grade MoSi2 Heating Elements (30 x 360mm)
Temperature Controller	Proportional–integral–derivative control (PID control) and auto-tune function 30 segments programmed with ramping, cooling, and dwelling steps Built-in over-temperature alarm and thermocouple failure alarm +/- 1℃ temperature control accuracy Default DB9 PC communication port
Net Weight	135 kg (286 lbs.)
Warranty	One-year limited warranty with lifetime support. ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of SAM One Year Limited Warranty.
Compliance	CE Certified NRTL or CSA certification is available upon request at an extra cost
Shipping Dimensions	48" x 40" x 49"
Shipping Weight	450 lbs.
Application Notes	For longer furnace service life, we recommend the heating rate not to exceed 10℃ /min. The cooling rate shall also not exceed 10℃ /min. This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating The refractory block must be inserted before closing the door