GR0932 Pyrolytic Graphite Tubes

Catalog No. GR0932
Material Graphite
Purity >99.99% for coating
Color Black
Shape Tube

Pyrolytic graphite  (PG) tube is a synthesized material created by the chemical vapor deposition process(CVD). Stanford Advanced Materials provide pyrolytic graphite coated and whole pyrolytic graphite tubes for graphite furnace atomic absorption. We can also supply 1~200ml crucibles for whole pyrolytic graphite material and larger sizes are available for coated products. The largest available size for PG coated products can be 350mm*600mm.

Related products: Graphite MoldGraphite Electrode for EDMGraphite Heater

Pyrolytic Graphite Tubes Description

Pyrolytic graphite is the ideal material to make components in graphite AAS, as the coated surface is extremely pure with zero porosity. As most of the pyrolytic graphite tubes(PG) and pyrolytic boron nitride (PBN) products are custom made, please allow 3~4 weeks of leading time. Silicon carbide CVD coating is also available for graphite products. The default membrane thickness of our pyrolytic graphite products is 30~50um. 
Pyrolytic graphite  (PG) tube is a synthesized material created by the chemical vapor deposition process(CVD). The carbon source for this process is natural gas, such as methane. Since the purity of gas is easier to be controlled than solid graphite, the purity of pyrolytic graphite material could be extremely high. Total impurity content is usually less than 10ppm. Pyrolytic graphite could be used as a coating material for substrates such as normal graphite. Since the PG coating is made by a CVD process with high purity gas, the surface of the pyrolytic graphite-coated products has extremely high carbon purity and strength with almost zero porosity. 

Pyrolytic Graphite Tubes Specification

If pyrolytic graphite material directly deposited on a mode, instead of a graphite substrate, pyrolytic graphite products without substrate could be obtained if the CVD process is long enough.  The wall thickness of whole pyrolytic graphite products is usually 1mm. Since pure pyrolytic graphite products need more material and a longer time to produce, the cost is higher than normal PG-coated graphite products. 



AC3226 Pressure Sensor Components (Ceramic)

sc/1616638522-normal-Pb-free Piezoelectric Elements (New Development).jpg

CM3259 Pb-free Piezoelectric Elements (New Development)

sc/1616638870-normal-Piezoelectric PZT Ceramic Substrates.png

CM3260 Piezoelectric PZT Ceramic Substrates

sc/1617780322-normal-Honey Comb Ceramic Filter Plates.jpg

CM3298 Honey Comb Ceramic Filter Plates (Honeycomb)

sc/1620893896-normal-Activated Alumina Al2O3.jpg

AC3370 Activated Alumina Al2O3

sc/1620894207-normal-Activated Alumina Carry Potassium Permanaganate.jpg

AC3371 Activated Alumina Carry Potassium Permanganate

sc/1621567374-normal-High Purity Yttria Zirconia (Y-TZP) Beads.jpg

ZR3407 High Purity Yttria Zirconia (Y-TZP) Bead

sc/1621568175-normal-Toughened Zirconium Silicate (ZS) Beads.jpg

ZR3409 Toughened Zirconium Silicate (ZS) Bead


Please fill in your details and one of our material experts will get back to you within 24 hours. For more information, contact us via E-mail at

** Email address with your company's domain name is preferred. Otherwise, we may not be able to process your inquiry.