/ {{languageFlag}}
Select Language
{{item.label}}

MSDS of Indium Metal

1 Identification Of Substance

Product details:
Trade name: Indium metal
Stock number: ME49
Manufacturer/Supplier:
Stanford Advanced Materials
23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A. 

E-mail : sales@samaterials.com

Tel : (949) 407-8904

2 Composition/Data On Components

Chemical characterization:
Description: Indium (CAS# 7440-74-6)
Identification number(s): EINECS Number: 2311800

3 Hazards Identification

Hazard description: • Not applicable
Information pertaining to particular dangers for man and environment: Not applicable

4 First Aid Measures

General information: No special measures required.
After inhalation: Seek medical treatment in case of complaints.
After skin contact Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing Seek medical treatment.

5 Fire Fighting Measures

Suitable extinguishing agents: Fire-extinguishing powder, Dry sand
Protective equipment: No special measures required.

6 Accidental Release Measures

Person-related safety precautions: Not required.
Measures for environmental protection: Do not allow material to be released to the environment without proper governmental permits.
Measures for cleaning/collecting: Pick up mechanically.
Additional information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

7 Handling And Storage

Handling
Information for safe handling: Keep container tightly sealed. Store in cool, dry place in tightly closed containers. No special precautions are necessary if used correctly.
Information about protection against explosions and fires: No special measures required.
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Do not store together with oxidizing and acidic materials.
Further information about storage conditions: None.

8 Exposure Controls And Personal Protection

Additional information about design of technical systems:
No further data; see item 7.
Components with limit values that require monitoring at the workplace:
Indium and compounds         mg/m3
ACGIH TLV                           0.1 as In
Belgium TWA                         0.1
Switzerland TWA                   0.1
United Kingdom TWA            0.1 as In, 0.3 as In-STEL
Netherlands TWA                  0.1
Denmark TWA                       0.1
Finland TWA                          0.1
Ireland TWA                           0.1, 0.3 STEL

Additional information: No data
Personal protective equipment
General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed.
Breathing equipment: Not required.
Protection of hands: Not required.
Eye protection: Safety glasses
Body protection: Protective work clothing.

9 Physical And Chemical Properties
Form: Solid mass
Color: Silver-colored
Odor: Odorless
Value/Range Unit Method
Change in condition
Melting point/Melting range: 156.17 ° C
Boiling point/Boiling range: 2000 ° C
Sublimation temperature / start: Not determined
Flash point: Not applicable
Flammability (solid, gaseous) Product is not flammable.
Ignition temperature: Not determined
Decomposition temperature: Not determined
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined
Upper: Not determined
Vapor pressure: Not determined
Density: at 20 ° C 7.31 g/cm3
Solubility in / Miscibility with
Water: Insoluble

10 Stability And Reactivity

Thermal decomposition / conditions to be avoided: Decomposition will not occur if used and stored according to specifications.
Materials to be avoided: Acids, Oxidizing agents, Sulfur
Dangerous reactions: No dangerous reactions known
Dangerous products of decomposition: Metal oxide fume

11 Toxicological Information

Acute toxicity:
Primary irritant effect:
on the skin: No irritant effect.
on the eye: No irritating effect.
Sensitization: No sensitizing effects known.
Subacute to chronic toxicity:
Exposure to indium compounds may cause pain in the joints and bones, tooth decay, nervous and gastrointestinal disorders, heart pain and general debility. Experiments with animals also indicate that indium may cause reduced food and water consumption with weight loss, pulmonary edema, pneumonia, blood, liver and kidney damage, leg paralysis and damage to the brain, heart, adrenals and spleen.
Additional toxicological information:To the best of our knowledge the acute and chronic toxicity of this substance is not fully known. No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH.

12 Ecological Information

General notes: Do not allow material to be released to the environment without proper governmental permits.

13 Disposal Considerations

Product:
Recommendation: Consult state, local or national regulations for proper disposal.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.

14 Transport Information

Not a hazardous material for transportation.
DOT regulations:
Hazard class: None
Land transport ADR/RID (cross-border)
ADR/RID class: None
Maritime transport IMDG:
IMDG Class: None
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: None
Transport/Additional information:
Not dangerous according to the above specifications.

15 Regulations

Product Related Hazard Informations: Observe the general safety regulations when handling chemicals
National regulations. All components of this product are listed in the U.S. Environmental Protection Agency Toxic Substances Control Act Chemical Substance Inventory.
Information about limitation of use: For use only by technically qualified individuals.

END OF DATA SHEET

THIS MATERIAL SAFETY DATA SHEET IS OFFERED SOLELY FOR YOUR INFORMATION, CONSIDERATION, AND INVESTIGATION. STANFORD ADVANCED MATERIALS PROVIDES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, AND ASSUMES NO RESPONSIBILITY FOR THE ACCURACY OR COMPLETE

About the author

Chin Trento

Chin Trento holds a bachelor’s degree in applied chemistry from the University of Illinois. His educational background gives him a broad base from which to approach many topics. He has been working with writing advanced materials for over four years in Stanford Advanced Materials (SAM). His main purpose in writing these articles is to provide a free, yet quality resource for readers. He welcomes feedback on typos, errors, or differences in opinion that readers come across.

REVIEWS
{{viewsNumber}} Thought On "{{blogTitle}}"
{{item.created_at}}

{{item.content}}

LEVE A REPLY (Cancle reply)

Your email address will not be published. Required fields are marked*

Comment
Name *
Email *
{{item.children[0].created_at}}

{{item.children[0].content}}

{{item.created_at}}

{{item.content}}

More Replies

LEAVE A REPLY

Your email address will not be published. Required fields are marked*

Comment
Name *
Email *

Related News & Articles

MORE >>
SAM logo
MSDS of Neodymium Oxide

Stanford Advanced Materials offers high quality neodymium oxide with material safety data sheet for your reference.

READ MORE >
Material Safety Data Sheet of Lanthanum Oxide

Stanford Advanced Materials (SAM) offers high quality lanthanum oxide with materials safety data sheet for your reference.

READ MORE >
MSDS of Tungsten Hexafluoride
MSDS of Tungsten Hexafluoride

MSDS (Material Safety Data Sheet) of Tungsten Hexafluoride is provided for your reference here.

READ MORE >
Leave A Message
Leave A Message
* Your Name:
* E-mail:
* Product name:
* Phone Number:
* Message: