IF5305 (Discontinued) 1100C Compact Hybrid Furnace KSL-1100X-S-H

Furnace Structure

• High-purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands
• Drop-down door for easy sample loading

Quartz Tube

• 2" quartz tube: OD50 × ID43.5 × L230 mm
• One-end closed

Flange

• Standard: vacuum sealing assembly with 1/4" gas inlet and outlet.  Fittings can be replaced by tube fittings or a KF25 port at an extra cost.

Chamber Size

• Size: 4"x4"x4" or 100x100x100 mm
• Capacity: 65 cubic-inch or 1 liter

Power

• 110V version: 950 W (Power cord is included)
• 220V version: 1.2KW (Power cord is not included)

Operating Temperature

• 1000℃ max for an hour
• 900℃ for continuous operation

Max. Heating Rate

30℃ /min

Temperature Controller

• PID automatic control and auto-tune function
• 30 programmable segments for precise control
• Built-in protection for the over-heating and broken thermocouple
• Large digital control panel (48 x 96 mm) for easy operation
• Temperature accuracy: +/- 1 ℃
• Thermocouple: K type

Overall Dimensions

• 250 x 305 x 350 mm (Without Flange)
• 250 x 450 x 410 mm (With Flange)

Net Weight

~ 18Kg

Dimensions

17"(L) x16"(W) x 20"(H)

Shipping Weight

45 lbs.

Warranty

• One-year limited warranty with lifetime support
• ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of SAM One Year Limited Warranty.

Compliance

• CE Certified for the furnace, vacuum pump, and water chiller.
• NRTL (UL61010) or CSA certification is available at extra cost.

Application Notes

• With its small footprint, low weight, and low power requirement, it can be easily accommodated in a glove box and threat samples under protective gas.
• For high vacuum application (<1e-5 torr), please choose a quartz tube with CF flange.

Warning

• Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. Please put the furnace into the fume hood for better safety.
• Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.