IF5165 (Discontinued) 1400C Max. Bottom Loaded Inert Gas Atmosphere Box Furnace KSL-1500X-GS125

Features

• 125L Volume, suitable for sintering large materials in laboratory
• The bottom loading mechanism by electric hydraulic lift, which can hold Max. 200 Kg sample
• Good sealing performance ensures that the material can be heat treated in vacuum or atmosphere environment
• Water cooling front door and sealing jacket for long service life.

Basic Parameters

• Operating Temperature: 1300℃ continuously
• Max. Temperature: 1400℃ (<1h)
• Accuracy: ±0.5℃
• Heating Elements: 12 molybdenum rods and heated on 4 sides in the furnace
• Thermocouples: 2 S-type thermocouples (temperature control thermocouple and detection alarm thermocouple)

Power

• AC380V Single Phase, 50/60 Hz
• Max. 40kW

Temperature Control System

• Eurotherm temperature controller is included.
• Proportional–integral–derivative control (PID control) and auto-tune function
• 30 segments programmed with ramping, cooling, and dwelling steps
• +/- 0.5℃ temperature control accuracy
• Default RS485 communication port

Gas flow control and vacuum pump

• 2 float flow meters, independently control 2 air inlets (air inlet: φ12.7mm)
• Equipped with a bipolar rotary vane vacuum pump for vacuuming the furnace.

Water cooling

• Equipped with a circulating water cooler with a water flow rate of 16L/min to water-cool the sealed part of the furnace body

Product Dimensions

• Furnace body: 1900*1800*3400 mm (L*W*H)
• Control System: 610*570*1540 mm (L*W*H)
• External transformer: 640*440*710 (L*W*H)
• Furnace size: 500*500*500 mm

Shipping Weight

3000 kg

Warranty

• One-year limited warranty with lifetime support.
• ATTENTION: Consumables: heating elements, quartz tubes, sample crucibles, etc. are not included.
• ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of SAM One Year Limited Warranty.

Compliance

• CE Certified
• TUV or CSA certification is available upon request at extra cost.