IF5157 (Discontinued) 1200C Muffle Furnace Programmable Controller KSL1200X-M

Furnace Structure

• High-purity fibrous alumina insulation for maximum energy saving.
• Heating elements on all three sides of the interior chamber for fast heating and enhanced temperature uniformity.
• Double-layer steel structure with air cooling fan to keep furnace's exteriors safe to touch.
• The safety interlock will automatically power off the furnace when the door is opened.
• Built-in vent port (top) to remove undesirable contaminants and moisture and extend the lifespan of the heating elements and furnace.

Chamber Dimensions

• Size: 12" x 12" x 12" (304 x 304 x 304 mm)
• Capacity: 27 liters (1728 cubic inches)
• Observation window of quartz (1/2" - 1" diameter) is available upon request

Working Temperature

1100℃ continuously

Max. Working Temperature

1200℃, ≤2 hours

Temperature Stability

±1℃

Temperature Uniformity

• +/- 5℃ over 200×200×200 mm @ 800℃
• +/- 2℃ over 80×80×80 mm @ 1100℃

Max. Heating Rate

10℃/min

Temperature Control System

• Proportional–integral–derivative control (PID control) and auto-tune function
• Constant temperature control accuracy: ±1℃
• All components and electronic components are approved by UL or MET

Gas Fitting & Exhaust

• One 1/4" barbed Gas Inlet was installed on the back panel of the furnace.
• One gas exhaust port is built on the top of the furnace casing.

Power

• 208~240V AC, Single phase, 50/60 Hz
• 7.5 kW  

Shipping Weight & Dimensions

70kg

48" x 40" x 50" (D x W x H)

Warranty

• One-year limited warranty with lifetime support.
• ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of SAM One Year Limited Warranty.

Compliance

• CE Certified
• NRTL (UL61010) or CSA certification is available upon request at an extra cost