IF5158 (Discontinued) 1200C High-temperature Laminating and Sintering Furnace KSL-1200X-M-HP

Features

• Double-layer steel structure with air cooling fan to keep furnace's exteriors safe to touch.
• The safety interlock will automatically power off the furnace when the door is opened.
• The heating furnace adopts a double-door method to facilitate sampling.

Heating chamber

• 208~240V AC, Single phase, 50/60 Hz
• 1100℃ continuously
• Heating rate: ≤10℃/min
• Heating Chamber: 300x300x250mm (max. sample area)
• Thermocouple: Type K including

Pressure

• Max force: 4KN (400KG)
• One gas cylinder is stalled on the top of the furnace to apply pressure to the sample via the alumina rod
• Pressure rod: 99% Alumina, 60mm diameter
• One pressure sensor is installed between the pushing rod and cylinder, which needs water cooling
• Cylinder stroke: 300 mm

Temperature Controller

• One touch screen PC is included for operation of the temperature and pressure
• Remote control via ethernet cable
• Digital temperature controllers with +/-1℃ accuracy with 30 programmable segments
• 10 custom formulas can be pre-stored
• Auto and Manual mode
• Customizable pressure mode
• Realtime display data (temp, pressure, duration), and logging.

Chiller

• Model: CW-3000
• Working voltage: AC 220V 50HZ
• Working current: 0.45A
• Water tank capacity: 9L
• Maximum flow rate: 10L/min

Product Dimensions

Furnace: 1205*805*2060 (L*W*H)

Shipping Weight

520Kg

Warranty

• One-year limited warranty with lifetime support.
• ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of SAM One Year Limited Warranty.

Compliance

NRTL (UL61010) or CSA certification is available upon request at an extra cost